Megaware KeelGuard comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime.
KeelGuard Sizes
Available from stock in 6 ft, 8 ft, 10 ft and 12 ft lengths in either Black or White.
To determine the recommended minimum length required for any craft, simply measure the distance from a mark 6 inches above the water line at the bow, back to 2 ft beyond the lowest point of the keel.
The final choice of length will be determined by the intended use of the craft, and level of protection required. For example, a longer length may be required to fully protect craft that are sometimes pulled all the way up a beach to prevent them from drifting off during a rising tide. For PWC measure from the bow eye back, ending 4 to 6 inches forward of the intake grate.
If a standard length Keelguard is found to be a little too long for your particular craft it can be cut to the desired length using a sharp bladed craft knife (or similar). It is better to trim from the aft section, using either a straight edge or the bow end radius as a template.
The KeelGuard width is 5 inches.
<< Go back to the KeelGuard information page
