Megaware SkegGuard

Your inexpensive solution to a broken skeg

SG_before.jpg

Damage to your skeg causes loss of performance.  It can also significantly reduce protection for your gear case and may increase the risk of damage to your propeller.

The SkegGuard from Megaware KeelGuard provides the very best of two worlds. It will protect and prevent damage to your motor's skeg and can also be used to repair and replace an already broken skeg.

The SkegGuard is made from high quality marine grade 316 stainless steel. The design also incorporates an extra reinforced wear tab across the bottom where the skeg is most vulnerable. This 3mm thickened lower plate will withstand damage or abrasion from hidden rocks and debris or accidental ramp dragging.

SG_after.jpg

The SkegGuard mirrors the profile and contour of your original lower unit to insure there is no discernable drag or compromise in performance. A drain hole keeps water from collecting and remaining stagnant.

Secured with stainless steel self-locking hardware, (which is included) the Megaware SkegGuard can be installed with simple tools in approximately 10 minutes. It will provide years of service and save hundreds of pounds in potential repairs.

If you wish to replace an already broken skeg, the Megaware SkegGuard can be installed on a lower unit with as little as 2-3 inches of skeg remaining. It will be stronger and much more affordable than a welding repair or replacing a complete lower unit. 

SkegGuard Installation GuideEasy application, installs in 10 minutes or less.
 
Megaware SkegGuard® is available in models to fit most skegs, including Evinrude, Johnson, Honda, Mercury, Mariner, Nissan, OMC, Tohatsu, Suzuki, Volvo and Yamaha.  

Model Guide

 Use to identify the model number you require

Manufacturer

 Model Number 27***  -  suitable Hp & year

   
Evinrude
Force
Honda
Johnson
Mariner
Mercruiser
Mercury
Nissan/Tohatsu
OMC Cobra
Suzuki
Volvo
Yamaha
  
ORDER HERE:-
Once you have identified the model number you require from the Guide above, then select the same model number from the box below and click the  "Add to Cart" button.
 Model Number 

 

***IMPORTANT***

BEFORE clicking "Add to Cart". Please ensure that the correct model number you require is displayed in the Model Number box above.

All models are £119.95

A UK (mainland) Delivery Charge of £8.95 applies.

Please contact us for information on the cost of deliveries to other destinations prior to purchase.

If you need help or advice please do not hesitate to contact us.

Telephone 01702 588065 or message via the contact us page.

ONLINE HELP. If you are not sure which model you need please use the Megaware SkegGuard Model Finder to confirm and verify suitability but once you have identified the correct model on this link you will then need to return to this page, (using the browser back arrow) and select the model number you require in the drop down box above to complete the order.